|
GIDGEE TRYING PLANE
To
Order this plane securely online: Hold down the Ctrl key and click
HERE.
This will open both the Secure Order Form tab and the HNT Gordon Catalogue
tab on your web browser found right at the top of this page. Click
between these tabs to 'copy and paste'
any tool(s) & prices from the web catalogue into the Secure Order Form.
Copy and Paste " Trying Plane
Gidgee TS $ 275 "
to order this plane.OR
Copy and Paste " Trying Plane Gidgee HSS
$ 315"
to order this plane. OR
Copy and Paste " Spare TS Blade $ 55" to
order this spare blade. OR
Copy and Paste " Spare HSS Blade $ 95" to order this spare
blade.
Post Australia $ 13, Post rest of the world $ 59 for either plane OR
Post Australia $ 8,
Post rest of the world $ 15 for either blade |
This gidgee
Trying plane is 460mm long x 67mm wide x
41mm high.
Weighs 0.9Kg and has a 50mm wide x 6mm thick x 97mm long
blade made from Tool Steel Rc 62-64, OR HSS 18% Tungsten
blade Rc 62. It has a 60 degrees blade angle
for planing or
90 degrees for scraping. The Handle allows
the plane to be pushed or pulled and
is removable on a taper.
Smoothing of any long timber
surface or for jointing. Works very well when used on a
shooting board. Especially good on cranky grain.
Alternate use as a cabinet scraper. |
See a detailed photo. |
Email:
the
Planemaker Ph: (+61) 02 6628 7222 Fax: (+61) 02 66
50 Northcott Cres, ALSTONVILLE NSW 2477
AUSTRALIA |
