|
GIDGEE SIDE REBATE PLANES
To
Order this plane securely online: Hold down the Ctrl key and click
HERE.
This will open both the Secure Order Form tab and the HNT Gordon Catalogue
tab on your web browser found right at the top of this page. Click
between these tabs to 'copy and paste'
any tool(s) & prices from the web catalogue into the Secure Order Form.
Copy and Paste " Gidgee Left
Handed Side Rebate Plane with TS blade $ 200 "
to order this plane. OR
Copy and Paste " Gidgee Right
Handed Side Rebate Plane with TS blade $ 200 "
to order this plane. OR
Copy and Paste " Pair of Gidgee
Side Rebate Plane with TS blade $ 380 "
to order this pair of planes. OR
Copy and Paste " Spare Left Hand TS Blade $
52 " to order this spare
blade. OR
Copy and Paste " Spare Right Hand TS Blade $
52 " to order this spare blade.
Post Australia $ 12, Post USA $ 32 to send one plane, OR
Post Australia $ 12, Post USA $ 54" to send a pair of planes. OR
Post Australia $ 8, Post USA $ 10 for either blade. |
These gidgee
Side Rebate Planes are 225mm long x
22 mm wide x 65mm high.
Weighs 0.6Kg
each
and have a 1/8” thick x
7/8” wide
Tool steelblade Rc 62-64
They have a
50 degrees
blade angle for planing. The sole is a
concave 1/2" radius, 90 degree segment on
the left or right hand side of plane.
Boxed in brass to minimise wear.
Used for trimming the vertical walls of dados and groves along
the grain or across the grain up to 7/8" deep. This also includes sliding dovetail
male and female parts. They can also be used for trimming the
vertical walls formed when making complex mouldings. Best to have a
pair of them so that you can handle any grain direction scenario you will
encounter.
Top Picture is the Left hand Side Rebate Plane.
Follow this
link for pictures on using these planes.
Using Side Rebate |
 |
Email:
the
Planemaker Ph: (+61) 02 6628 7222 Fax: (+61) 02 66
50 Northcott Cres, ALSTONVILLE NSW 2477
AUSTRALIA |
