|
GIDGEE
JOINTER PLANE
To
Order this plane securely online: Hold down the Ctrl key and click
HERE.
This will open both the Secure Order Form tab and the HNT Gordon Catalogue
tab on your web browser found right at the top of this page. Click
between these tabs to 'copy and paste'
any tool(s) & prices from the web catalogue into the Secure Order Form.
Copy and Paste " Gidgee Jointer
Plane with TS blade $ 375 "
to order this plane. OR
Copy and Paste " Gidgee Jointer Plane
with HSS blade $ 405" to order this plane. OR
Copy and Paste " Spare TS Blade $ 55" to
order this spare blade. OR
Copy and Paste " Spare HSS Blade $ 85" to order this spare
blade.
Post Australia $ 20, Post rest of the world $ 87 for either plane OR
Post Australia $ 8,
Post rest of the world $ 15 for either blade |
This gidgee
jointer plane is from 610mm long up to 685mm long x 70mm wide X
48mm
high. Please specify the length you want as they can be made to suit.
Weighs 3.1 Kg and has a 50mm wide x 6mm thick x 97mm long
Tool Steel blade Rc 62-64, OR HSS 18% Tungsten
blade Rc 62. It has a 60 degrees blade angle
for planing or
90 degrees for scraping. The Handle allows
the plane to be pushed or pulled and
is removable on a taper.
Flattening of any very long timber
surface or for jointing very long boards over 1.8m. Works very well when used on a
long
shooting board. Especially good on cranky grain.
Alternate use as a cabinet scraper. |
|
Email:
the
Planemaker Ph: (+61) 02 6628 7222 Fax: (+61) 02 66
50 Northcott Cres, ALSTONVILLE NSW 2477
AUSTRALIA |
