|
GIDGEE AUSSIE JACK PLANE
To
Order this plane securely online: Hold down the Ctrl key and click
HERE.
This will open both the Secure Order Form tab and the HNT Gordon Catalogue
tab on your web browser found right at the top of this page. Click
between these tabs to 'copy and paste'
any tool(s) & prices from the web catalogue into the Secure Order Form.
Copy and Paste " Gidgee Aussie
Jack Plane with
TS blade $ 240 "
to order this plane.OR
Copy and Paste " Gidgee Aussie
Jack Plane with HSS blade $ 280"
to order this plane. OR
Copy and Paste " Spare TS Blade $ 45" to
order this spare blade. OR
Copy and Paste " Spare HSS Blade $ 85" to order this spare
blade.
Post Australia $ 13, Post rest of the world $ 46 for either plane OR
Post Australia $ 8,
Post rest of the world $ 15 for either blade |
This gidgee
Aussie Jack plane is 300mm long x 67mm wide x 38mm high.
Weighs 1.3Kg and has a 50mm wide x
4mm thick x 97mm long
Tool Steel blade Rc 62-64, OR HSS 18% Tungsten
blade Rc 62.
It has a 55 degrees blade angle
for planing or
85 degrees for scraping.
Knob and tote handle
superbly shaped by Ross Burgess.
Used for dressing rough sawn boards to the point where
a trying plane can take over. Alternate use as a cabinet scraper for cranky
grain. |
|
Email:
the
Planemaker Ph: (+61) 02 6628 7222 Fax: (+61) 02 66
50 Northcott Cres, ALSTONVILLE NSW 2477
AUSTRALIA |
