|
GIDGEE A55 TRYING PLANE
To
Order this plane securely online: Hold down the Ctrl key and click
HERE.
This will open both the Secure Order Form tab and the HNT Gordon Catalogue
tab on your web browser found right at the top of this page. Click
between these tabs to 'copy and paste'
any tool(s) & prices from the web catalogue into the Secure Order Form.
Copy & Paste " Gidgee A55 Trying
Plane with TS blade $ 380 " to order this plane. OR
Copy & Paste "Gidgee A55 Trying
Plane Gidgee with HSS blade $ 425" to order this plane. OR
Copy and Paste " Spare TS Blade $ 55" to
order this spare blade. OR
Copy and Paste " Spare HSS Blade $ 100" to order this
spare blade.
Post Australia $ 13, Post rest of the world $ 61 for either plane OR
Post Australia $ 8,
Post rest of the world $ 15 for either blade |
This gidgee
A55 trying plane is 460mm long x 67mm wide x
41mm high.
Weighs 1.9Kg and has a
50mm wide x 6mm thick x 97mm long
Tool Steel blade Rc 62-64, OR HSS 18% Tungsten
blade Rc 62.
It has a 55 degrees
blade angle for planing or
85 degrees for scraping.
For adjustment there is a fine thread screw with lateral movement (10th turn
gives meaningful change in depth). The mouth is
protected by a brass rub plate. Knob and tote handle
superbly shaped by Ross Burgess.
Smoothingand flattening of any long timber
surface or for jointing boards.
Works very well when used on a
shooting board. Especially good on cranky grain.
Alternate use as a cabinet scraper. A cabinet makers work horse. |
For a detailed
photo click here. |
Email:
the
Planemaker Ph: (+61) 02 6628 7222 Fax: (+61) 02 66
50 Northcott Cres, ALSTONVILLE NSW 2477
AUSTRALIA |
