|
GIDGEE A55 JOINTER PLANE
To
Order this plane securely online: Hold down the Ctrl key and click
HERE.
This will open both the Secure Order Form tab and the HNT Gordon Catalogue
tab on your web browser found right at the top of this page. Click
between these tabs to 'copy and paste'
any tool(s) & prices from the web catalogue into the Secure Order Form.
Copy & Paste " Gidgee A55
Jointer
Plane with TS blade $ 480 " to order this plane. OR
Copy & Paste "Gidgee A55
Jointer Plane with HSS blade $ 525" to order this plane. OR
Copy and Paste " Spare TS Blade $ 55" to
order this spare blade. OR
Copy and Paste " Spare HSS Blade $ 100" to order this
spare blade.
Post Australia $ 20, Post rest of the world $ 87 for either plane OR
Post Australia $ 8,
Post rest of the world $ 15 for either blade |
Gidgee
A55 Jointer planes are available from 610mm long up to 685mm long x 70mm wide X
48mm
high. Please specify the length you want as they can be made to suit.
Weighs 3.5 Kg and has a 50mm wide x 6mm thick x
105mm long
Tool Steel blade Rc 62-64, OR HSS 18% Tungsten
blade Rc 62.
It has a 55 degrees
blade angle for planing or
85 degrees for scraping.
For adjustment there is a fine thread screw with lateral movement (10th turn
gives meaningful change in depth). The mouth is
protected by a brass rub plate. Knob and tote handle
superbly shaped by Ross Burgess.
Used for final smoothing of any
long timber
surface which has been dressed by a planer, thicknesser
or Jack Plane. Used correctly this plane will smooth any
difficult timber surface leaving little or no sanding.
Alternate use as a cabinet scraper simply by reversing
the blade. A cabinet makers work horse. |
 |
Email:
the
Planemaker Ph: (+61) 02 6628 7222 Fax: (+61) 02 6628
7522
50 Northcott Cres, ALSTONVILLE NSW 2477
AUSTRALIA |
